| INTRODUCTION: |
The importance of continuously variable voltage in Electrical Engg. Works cannot be overemphasized, ARKAY
'VARISTAT' are made to make such continuously variable voltage most easily available. |
|
The intrinsic quality control check-ups under the supervision of highly experienced engineers ensures the ruggedness and reliability of operation
|
| SPECIAL FEATURES: |
| |
VARISTAT continuously variable Auto Transformers have many operating advantages and conveniences
over other manually operated voltage control devices for alternating current use |
| 1) |
Smooth Control: The VARISTAT can be set to any output voltage within its range. Output voltage is continuously adjustable from zero to maximum. |
| 2) |
Small Size: The variable Auto Transformers is much smaller than any other type of control of equal rating. |
| 3) |
Better Efficiency: Very low losses under all loud conditions. Toroidal VARISTAT have low-loss grain oriented strip wound cores. |
| 4) |
Better Regulation: Output voltage is substantially independent of loud. |
| 5) |
Linear Output Volts: Output Voltage varies linearly with angle of rotation of control knob. |
| 6) |
Temperature rise: Less than 50 deg. C for continuous duty. |
| 7) |
Advanced Design: Excellent electrical specification is matched by rugged, compact construction. Brush
replacement is simple and convenient.Two,Three or more units can be ganged on one shaft for series,parallel or three-phase operation. |
| 9) |
Long Life: When used correctly the VARISTAT has a very long operating life.The life of a VARISTAT is
essentially the same as that of any standard fixed ratio power transformer. |
| |
-Indian Standards: All VARISTAT unit conform to I.S.S. 5142-1969 |
| |
-Easily Read Dials: Dials are single - reading with large, clear numerals, easy to read at a distance. |
| |
-Wide range of models: VARISTAT are available in a wide range of models to suit various requirements. These
include: |
| |
Open - for panel mounting purpose |
| |
Enclosed - Suitable for table mounting |
| |
Portable - with or without meters |
| |
Oil Cooled - for increased ratings |
| |
Double Wound - Where the primary is isolated from the secondary prominent for manufacturer of servo-control
voltage stabilizer |
| |
High Frequency - for various louds |
| |
Special Voltage - 120v, 240v, 400v,etc. |
| VARISTAT APPLICATION: |
Supply Voltage Correction, Boosting of low lines and line voltage stabilization, either manually or automatically in automatic voltage stabilizers
Control of D.C. voltage and current through rectifiers. Control of rectifiers in electroplating, battery chargers etc.
Motor speed control in textile machines, blow molding machines, injection molding machines,printing and
packaging machineries etc.
Testing and calibration of voltmeters, ammeters, wattmeter's, power-factor meters etc.
Voltage and current control in development and experimental works
Heating control of ovens,furnaces, infra-red heaters etc. in production and experimental works Lighting control in theaters, auditorium, hotels, restaurant, photographic studios and dark-rooms,
reading houses,etc. |
| SPECIFICATIONS: |
Input Voltage: The voltage that should be applied to the input terminals to make the dial calibration
correct is 240v, 50Hz, 415v, 50Hz
Output Voltage: The output voltage from the varistat is continuously adjustable from zero to 12.5%
above the line voltage (i.e. 270V or 470V). The dial reads the approximate voltage.
No load current: Less than 2% of full load
-Construction: Both single and three phase units are supplied enclosed in sheet metal covers, unless
asked for open type construction for panel mounting,oil cooled units are supplied in sheet-metal tanks with
or without cooling radiators. -Current ratings: (single wound type) |
